File size: 2.23 MB
File type: pdf
Last download on: Tue Feb 25, 2014 10:15:13 AM
The Instrumentation and Control Fundamentals Handbook was developed to assist nuclear facility operating contractors provide operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of instrumentation and control systems. The handbook includes information on temperature, pressure, flow, and level detection systems; position indication systems; process control systems; and radiation detection principles. This information will provide personnel with an understanding of the basic operation of various types of DOE nuclear facility instrumentation and control systems. Key Words: Training Material, Temperature Detection, Pressure Detection, Level Detection, Flow Detection, Position Indication, Radiation Detection, Process Control
The Instrumentation and Control handbook consists of seven modules that are contained in two volumes. The following is a brief description of the information presented in each module of the handbook. Volume 1 of 2 Module 1 - Temperature Detectors This module describes the construction, operation, and failure modes for various types of temperature detectors and indication circuits. Module 2 - Pressure Detectors This module describes the construction, operation, and failure modes for various types of pressure detectors and indication circuits. Module 3 - Level Detectors This module describes the construction, operation, and failure modes for various types of level detectors and indication circuits. Module 4 - Flow Detectors This module describes the construction, operation, and failure modes for various types of flow detectors and indication circuits. Module 5 - Position Indicators This module describes the construction, operation, and failure modes for various types of position indicators and control circuits. Volume 2 of 2 Module 6 - Radiation Detectors This module describes the principles of radiation detection, detector operation, circuit operation, and specific radiation detector applications. Module 7 - Principles of Control Systems This module describes the principles of operation for control systems used in evaluating and regulating changing conditions in a process. The information contained in this handbook is by no means all encompassing. An attempt to present the entire subject of instrumentation and control would be impractical. However, the Instrumentation and Control handbook does present enough information to provide the reader with a fundamental knowledge level sufficient to understand the advanced theoretical concepts presented in other subject areas, and to better understand basic system and equipment operations.
Bookmark or share this info on Google+ and leave comment at below :
People who downloaded this also viewed in this sites:
Utility Monitoring and Control Systems File : pdf, 13 MB, 263 pages TOC Chapter 1. Introduction 1. Purpose 2. Scope 3. References 4....
An InvariantBased Approach to the Design of Hybrid Control Systems Technical Report of the ISIS Group at ... only continuous components may seem...
INTRODUCTION. A basic instrument system consists of a sensor (tutorial 2), a processor and a receiver. This tutorial is about the ......
Leave comment :
"DOE FUNDAMENTALS HANDBOOK INSTRUMENTATION AND CONTROL Volume 2 of 2"
Related Free Files
Control Systems Engineering... - Download: 438 times
Control Theory 2nd edition... - Download: 143 times
Fundamentals of Instrumentation and Control... - Download: 1716 times
Fuzzy and Neural Control... - Download: 87 times
Qualitative Concepts in Control Engineering... - Download: 47 times
Inductively Coupled Sensor/Actuator System... - Download: 244 times
Feedforward on Temperature Control Systems... - Download: 373 times
Learning Control Systems... - Download: 143 times
Modern Conveyor Architecture Engineering... - Download: 122 times
Fundamentals of industrial control... - Download: 299 times